Cleaning And Maintenance; Disposal At The End Of Life; Support And Warranty - Imetec D1105 Instrucciones De Uso

• Connect the power plug to the mains socket.
• Press the ON/OFF button to start up the device.
• If necessary, add extra liquid through the hole in the lid.
• Stop the device by releasing the ON/OFF button.
• Remove the plug from the power socket.
• Remove the lid from the jug.
• Release the blender jug from the motor unit by rotating it anti-clockwise [Fig. D].
• Pour out the mixture.
WARNING! Always disconnect the appliance from the
socket before cleaning or performing maintenance.
• Clean the accessories according to the instructions in the "Cleaning before first use" chapter.
• Wipe the motor unit with a dampened and thoroughly squeezed out sponge.
• Dry with a dry cloth.
The appliance packaging is made of recyclable materials. Dispose of the packaging in accordance
with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the
crossed bin symbol on the appliance or its packaging indicates that the appliance must be
disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical
and electronic equipment. Alternatively, instead of handling the disposal, the user can hand
over the appliance to the retailer when a new, equivalent one is purchased. The user can hand over
electronic products measuring less than 25 cm to retailers of electronic products having a sales area
of at least 400 m free of charge and with no obligation to buy. Appropriate separate collection for the
2
subsequent procedure for the decommissioned appliance for recycling, which includes treatment and
environmentally friendly disposal helps prevent adverse effects on the environment and health and
promotes reusing and/or recycling materials that the appliance consists of.
The appliance is guaranteed for a period of two years from the date of delivery. This date is taken as the
date on the receipt/invoice (as long as it is clearly legible), unless the purchaser can prove that delivery
was made at a later date.
In the event of a product flaw already present at the time of delivery, the cost-free repair or replacement
of the appliance is guaranteed unless one of the two solutions is out of proportion with the other. The
purchaser is responsible for informing an Authorised Assistance Centre about the conformity flaw within
two months of discovering it.
The warranty does not cover parts that may be faulty due to:
a. damage from transport or accidental drops,
b. incorrect installation or inadequate electrical system,
c. repairs or alterations performed by unauthorised personnel,
d. insufficient or improper maintenance and cleaning,
e. products and/or product parts subject to wear and/or consumables, including the reduced operating

CLEANING AND MAINTENANCE

DISPOSAL AT THE END OF LIFE

SUPPORT AND WARRANTY

EN
13