Safety Instructions - Klarstein 10029123 Manual De Instrucciones

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
• Read all the safety and operating instructions carefully and retain them for future reference.
• This product is intended for outdoor use only. Do not use indoors.
• Always keep children and pets at a safe distance from the oven when in use.
• Never leave a burning fire unattended.
• Danger of carbon monoxide poisoning. Never light this product, let it smoulder or cool down in confined spaces.
• Do not use this product in a tent, caravan, car, cellar, loft or boat.
• Do not use under any awnings, parasols or gazebos.
• Fire hazard – hot embers may emit while in use.
• Caution - do not use petrol, white spirit, lighter fluid, alcohol or other similar chemicals for lighting or religh-
ting.
• It is highly recommended that you use lump charcoal in your oven. It burns for longer and produces less ash
which can restrict the airflow.
• Important: when opening the lid at high temperatures it is essential to lift the lid only slightly, allowing air to
enter slowly and safely, preventing any backdraft or flare-ups that may cause injury.
• Do not use the oven on decking or any other flammable surfaces such as dry grass, wood chips, leaves or
decorative bark.
• Ensure that the oven is positioned at least 2 metres away from flammable items.
• Do not use this oven as a furnace.
• Attention: this product will become very hot, do not move it during operation.
• Always use heat resistant gloves when handling hot ceramics or cooking surfaces.
• Allow the unit to cool down completely before moving or storing.
• Always inspect the unit prior to use for fatigue and damage and replace as and when necessary.
Step 1
Attach one bracket piece (2) to the two brace rings (1).
Secure the bracket to each brace ring using the 8x screws
(A) with the 8x dome-headed nuts (B).
Step 2
Continue to attach the other brackets to the brace rings by
aligning screw holes, and using the screws (A) and dome
headed nuts (B). Please reference the above diagram.

Safety Instructions

Assembling
6