Tabla de contenido
Idiomas disponibles

Idiomas disponibles

22. Plug power cord into 120V wall
outlet. Fig. 20.
23. Install upper and lower decorative
flue onto range hood. Tabs on lower
flue engage slots on top of hood.
Fig. 21.
24. Secure upper flue to flue mounting
bracket with (2) 3.9 x 6 mm screws.

INSTALL FILTERS

DUCTED AND NON-DUCTED HOODS
1. To remove the grease filter, push in
latch tab to disengage the filter from
the hood. Tilt the filter downward and
remove. Fig. 22.
2. To install the grease filter, align rear
filter tabs with slots in the hood. Push
latch tab in, push filter into position
and release. Make sure the filter is
securely engaged after installation.
NOTE: Prior to use, remove protective
film from the filter frame.
NON-DUCTED HOODS ONLY
1.
Lift glass front panel and remove
the grease filter.
2.
Install (2) charcoal filters to the
blower, as shown. Fig. 23.
3.
Re-install grease filter and close the
front panel.
3.9 x 6mm
SCREWS (2)
FIG.21
- 12 -
GREASE FILTER
CHARCOAL FILTERS
POWER
CORD
FIG.20
FIG.22
FIG.23
Tabla de contenido
loading

Tabla de contenido