Interior Adjustments - Viking 5 Serie Manual De Instrucciones

Operating Instructions

Interior Adjustments

All 5 Series models feature side mounted rack supports with
19 adjustment positions.
All Beverage Centers ship with 2 wine racks and 2 Storage
bins - Remove and reposition as desired.
WINE RACK ADJUSTMENT
Wine Rack Removal
1. Fully extend empty rack
2. Firmly grasp both sides of rack and lift front end of rack
slightly (about ¼ ") to center the pin in the slot
3. Pull rack towards you until all pins are clear of the slots.
If only repositioning the rack, do not remove completely
- go to "Rack Installation" Step 2.
4. Slightly tilt one side. Gently pull rack towards you to
remove rack from unit.
Note: Take care when removing rack to avoid scratching
interior of unit.
5.
Note: The slides on the rack have a thin coating which is
used to block moisture and provide lubrication. Use care
when handling.
Wine Rack Installation
1.
2.
Center
the pin
3.
4.
12
Once removed, retract the slides.
Insert empty rack into unit with one side tilted slightly
downward until back pin is between front and rear rail
supports.
Tilt rack back to horizontal and line up 2 back pins with
back slots.
Center
the pins
Back Pin
Line up 2 back pins with 2 back slots and 2 front pins
with 2 front slots.
Continue inserting rack until all four pins are fully
inserted. Front of rack will set down slightly into the
front slots and be locked into position.
Front Pin