Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety Messages to Installers and Users
It is important to follow all instructions shipped with this product.
This device is to be installed by a trained electrician who is
thoroughly familiar with the National Electrical Code and/or
Canadian Electrical Code and will follow the NEC and/or CEC
Guidelines as well as all local codes.
This device should be considered a part of the warning system and
not the entire warning system. The selection of the mounting location
for the device, its controls and the routing of the wiring are to be
accomplished under the direction of the facilities engineer and the
safety engineer. In addition, listed below are some other important
safety instructions and precautions you should follow:
•
Read and understand all instructions before installing or operating
this equipment.
•
Never alter the unit in any manner. Safety in hazardous locations
may be endangered if additional openings or other alterations are
made in units specifically designed for use in these locations.
•
Do not connect this light to the system when power is on.
•
After installation, ensure that all threaded joints are properly tight-
ened.
•
Keep the unit tightly closed when in operation.
•
After installation, test the light system to ensure that it is operat-
ing properly.
•
After testing is complete, provide a copy of these instructions to
all personnel.
•
Establish a procedure to routinely check the light system for
proper activation and operation.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
Installation and Maintenance Instructions
Model 27XST-024-4
5
Capítulos
Tabla de contenido
