Installation; Schematic Diagram Showing The Dos Module; Installing The Dos Module; Suspended Installation - Miele professional DOS K 85 Instrucciones De Montaje

Ocultar thumbs Ver también para DOS K 85:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
Suspended

installation:

Flat
installation:

Schematic diagram showing the DOS module

Installing the DOS module

The DOS module is supplied with two screws (4.2 x 25 mm) and two
plugs (6 mm) for installation.
Select a suitably accessible position, e.g. on an adjacent wall or in
a unit for installing the DOS module.
Using the drawing as a guide fit the screws the correct distance
apart (80.0 mm) and suspend the DOS module from these.
Two slots, 76.0 mm apart are provided at the bottom of the DOS
module for fixing the DOS module to a thin carrier or plate. 3.9 mm
diameter screws (not supplied) are required for securing the DOS
module.
Drill two holes through the plate and screw the DOS module firmly
in place from underneath.
en - Installation
37
Tabla de contenido
loading

Tabla de contenido