1
Use the gunning sight (1) for the
N
cutting blade to align the blade to
the edge
FCB-KM
Approved KombiEngines
KombiEngines
Only KombiEngines supplied by STIHL
or expressly approved by STIHL for use
with the specific model are authorized.
Only use this KombiTool with the
following KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R,
KM 90 R, KM 94 R, KM 110 R,
KM 130 R
WARNING
For machines with a loop handle, the clip
(barrier bar) must be installed.
Assembling the Unit
Pull the protective caps off of the
N
ends of the shaft and keep them in a
safe place for later use – see
"Storing the Machine"
Connecting drive tube to gearbox
1
2
Loosen the clamping screw (1) on
N
the gearbox – do not remove
Insert curved end of drive tube (3) in
N
the gearbox (2), turn the gearbox
back and forth as necessary.
Push the shaft (3) in as far as it will
N
go.
Screw in the clamping screw (1) as
N
far as it will go – do not tighten yet!
English
11