Stihl MS 461 R Manual De Instrucciones página 28

English
Lift up the bumper strips (1)
N
Remove screws (2)
N
Insert screws (3) M5x20 from the
N
conversion kit as shown in the
picture
Put on the bumper strips (1) again
N
26
Push the spacers (4), cover (5), and
N
spiked bumper (6) onto the screws
and secure them with the
locknuts (7)
Mounting the depth limiter
Mount the guide bar and saw chain
N
– see "Mounting the bar and chain"
Slide the guide (1) over the bar and
N
screw in the screws (2)
3
5
Push the slide (3) into place
N
Fit the star screw with washer (5)
N
Tighten screws (2)
N
3
4
Pull the slide (3) forward as far as
N
possible
Tighten star screw (4)
N
2
4
MS 461 R