Imetec N1202 Instrucciones De Uso página 26

Licuadora en frío
Ocultar thumbs Ver también para N1202:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WARNING! Risk of injuries or damage to the appliance. Use
the presser only to press fruit or vegetables. DO NOT use
your fingers or any other tool.
EN
WARNING! Risk of damage to the appliance. DO NOT use
the appliance with ice, cereals, dry beans, coffee pods,
pepper corns, alcohol containing food. Remove the stones
of fruit (e.g. peach, apricot, cherry, etc.).
• Alternate fruit and vegetables when filling it.
• To avoid damaging the filters and for the product to work properly:
- do not insert hard or fibrous fruit such as sugar cane,
- always shell pomegranates and only include the seeds and not the skin.
• Only use dried fruit that has been left to soak for at least 8 hours, and always add water before
extracting.
• Always cut fibrous vegetables into small pieces.
• If the appliance stops during use, press the button to the REV position. If the appliance is still blocked,
switch it off and remove the plug from the socket. Open the inlet and remove the excess food before
resuming the process.
• To prepare coconut milk, use a hammer to open the coconut. Once the shell is broken, separate the
pulp, rinse it with water and cut it into 1 cm pieces.
• When using the sorbet accessory, thaw the fruit for about 10 minutes before putting it into the juice
extractor.
• Prepare sauces by inserting only dry foodstuffs first, adding the oil once the extracted sauce has been
collected in a bowl.
• The hermetic spout may be left in the closed position if you wish to extract juice from various types of
fruit and vegetables. In this case do not allow the juice to exceed the maximum quantity indicated on
the container, as it might leak out.
• Connect the power plug to the mains socket.
• Place the juice container in front of the dispensing nozzle and the pulp waste container in front of the
pulp waste outlet.
• Operate the appliance by pressing the on/off button to the on position.
• Insert the food through the hopper.
• After adding the last ingredient, let the juicer operate until all the juice obtained is fed out of the
container.
• To switch the appliance off, press the on/off button to the off position.
• For easier removal of pulp and fibres, close the airtight spout, switch the juicer on and pour water in
the hopper tube. Operate the juicer for about 20 seconds, place the juice container under the spout
and open the airtight spout for the water to drain out.
• After using the appliance, clean it immediately to prevent the food from clogging the stainless steel
filter when it dries.
• Remove the plug from the power socket.
23

Capítulos

Tabla de contenido
loading

Tabla de contenido