Ec Declaration Of Conformity; Repair And Maintenance; Lubricating The Machine; Cleaning And Care - Proxxon FF 500 Manual De Instrucciones

6 Accessories
Commercially availabe milling cutters with a maximum shaft dia-
meter of 12 mm and a tool diameter of approx. 40 mm can be used.
For an optimal working result, it is necessary to adapt the milling
cutter as well as the milling parameters (feed, milling depth, rota-
tional speed) to the working conditions and to make a choice from
these. We recommend the milling inserts from our accessories pro-
gram, such as the end mill cutter set (2-5 mm) 24610 or - for lar-
ger work - the end mill cutter set (6-10 mm), article no. 24620.
You will fi nd further suitable milling and drilling tools in PROXXON quali-
ty from our comprehensive program in specialist shops or at www.prox-
xon.com. They will be able to recommend a suitable PROXXON product
for your special application case.
A useful accessory for precisely adjusting the height of the spindle is the
easy to retrofi t fi ne feed (Art. No.: 24 254). A particularly fi ne processing
depth can be adjusted here optionally by handwheel (graduation 1 gra-
duation line = 0.025 mm).

7 Repair and Maintenance

Disconnect the mains plug before all repair and maintenance work!
7.1 Adjusting the play of the cross table or Z carriage
guides
If the guide of a cross table or Z carriage axis develops too much play
after some time, you can readjust the play using the adjusting screw
2 (Fig. 10). To do so, release the counter nuts 1 and evenly turn in
all adjusting screws until the play is eliminated. Then retighten the
counter nuts.

7.2 Lubricating the machine

After use, clean the cross table and milling cutter with a soft cloth or brush.
Then lightly oil the guides and distribute the oil by traversing the table.
Never clean the cross table with compressed air as the guides would be
destroyed by the entering swarf.
To guarantee the long service life of the milling cutter, please comply
with the lubrication schedule in Fig. 11 (A: Oil before beginning any work
/ B: Oil monthly). Only use acid-free machine oil from specialist shops!

7.3 Cleaning and care

Always disconnect the mains plug before any cleaning, adjusting,
maintenance or repair! Risk of injuries!
The machine is primarily maintenance free. For a long service life,
clean the device after every use with a soft cloth, hand brush or brush.
A vacuum cleaner can also be recommended.
Caution!
Caution!
Note:
8 Disposal
Do not dispose of the device in the household waste! The device con-
tains valuable substances which could be recycled. If you have ques-
tions concerning this topic, please address your municipal disposal
company or other appropriate municipal institutions.

9 EC Declaration of Conformity

Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this product conforms to the
following directives and normative documents:
EU EMC Directive 2014/30/EC
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 01.2016
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive 2006/42/EC
DIN EN 61029-1 / 01/2010
Date: 18.05.2016
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the signatory.
FF 500/BL
24350
- 13 -