Hkoenig WMG800 Manual De Instrucciones página 7

CLEANING AND MAINTENACE
DISASSEMBLING
u Make sure that the motor has stopped completely.
u Disconnect the plug from the
power outlet.
u Disassemble by reversing the
steps from 1-6 pictures.
u To remove the cutting plate easily,
place a screwdriver between the
cutting plate and the head as
illustrated and lift it up (fig.12).
u Press the fasten knob，move the
head as per direction illustrated
on fig 13,then you can take out
the head.
CLEANING
u Make sure that the motor has
stopped completely.
u Disconnect the plug from the power outlet.
u Remove meat, etc. Wash each part in warm soapy water.
u A bleaching solution containing chlorine will discolor
aluminum surfaces.
u Do not immerse the motor housing in water, but only
wipe it with a damp cloth.
u Thinners and petrol will crack or change the color of the
unit.
u Wipe all the cutting parts by vegetable oil -wet cloth.