Service And Maintenance - EGAmaster AQUAMaster 79915 Manual De Instrucciones

CAUTION – Injury due to carelessness!
CAUTION –If the machine is fixed to suspension equipment make sure that it is
secure. Never hang the machine onto the supply line.
Separate the machine form any external energy source before changing the
·
machine tool or an accessory.
· Avoid direct contact with the machine tool during and after use as it can be hot or
sharp.
· Wear protective gloves when changing a tool or an accessory!
Notice: Defective/ inappropriate gloves can lead to injury. Only wear proper hand protection,
adapted to the work place requirements.
WARNING – Explosion hazard!
When operating the machine in areas exposed to explosion hazards, use only
accessories, respectively devices, which are ATEX approved and specified.
SAFETY INSTRUCTIONS FOR PREVENTION OF TRANSPORT HAZARDS
ATTENTION – Improper Transport, danger of life due to parts falling down!
Damage of the machine!
· Separate the machine form any external energy source before transportation.
Check that the machine is undamaged and in proper condition.
· Never carry the machine at the supply line.
Wear worker's protective shoes!
Basic Safety Instructions:
WARNING – Maintenance and repair work on pneumatic equipment.
Compressed air can cause severe injury. Observe legal regulations. Take
precautions for persons and environment.
Additionally, observe the following:
· Secure machine against unintentional starting and let the machine cool down to
the ambient temperature
· Use suitable transport equipment, hoists or lifting accessories for moving heavy
assembly groups or parts. Protection against tipping, tumbling or falling down when
assembling/ disassembling the machine/parts.

SERVICE AND MAINTENANCE

47