Tabla de contenido
Technical data
Technical data
GENERATOR
*Stand-by single-phase power
*PRP single-phase power
Frequency
Cos ϕ
* Output powers according to ISO 8528-1
ALTERNATOR
Type
Insulating class
ENGINE
Mark / Model
Type / Cooling system
Cylinders / Displacement
*Stand-by net power
*PRP net power
Speed
Fuel consumption (75% of PRP)
Engine oil capacity
Starter
* Powers according to SAE J1349
GENERAL SPECIFICATION
Tank capacity
Running time (75% of PRP)
Protection
Dimensions / max. Lxwxh (mm) *
Weight (dry) *
Measured acoustic power LwA (pressure LpA)
Guaranteed acoustic power LwA (pressure LpA) 97 dB(A) (72 dB(A) @ 7 m)
* Dimensions and weight are inclusive of all parts.
Declared power according to ISO 8528-1 (temperature 25°C, 30% relative hummidity, altitude 100 m above sea level).
(*Stand-by) = maximum available power for use at variable loads for a yearly number of hours limited at 500 h. No overload is
admitted.
(**Prime power P.R.P.) = maximum available power for use at variable loads for a yearly illimited number of hours. The average
power to be taken during a period of 24 h must not be over 80% of the P.R.P.
It's admitted overload of 10% each hour every 12 h.
In an approximative way one reduces: of 1% every 100 m altitude and of 2.5% for every 5°C above 25°C.
ATTENTION: The concrete risk due to the machine depends on the conditions in which it is used. Therefore, it is up to the end-
user and under his direct responsibility to make a correct evaluation of the same risk and to adopt specific precautions (for
instance, adopting a I.P.D. -Individual Protection Device)
(L
Acoustic Noise Level
submitted to the distance of measurement.
Acoustic Pressure (Lp) - Measure Unit dB(A):
in proportion to the distance of measurement.
The here below table shows examples of acoustic pressure (Lp) at different distances from a machine with Acoustic Noise Level
(L
)
of 95 dB(A)
WA
Lp a 1 meter = 95 dB(A) - 8 dB(A) = 87 dB(A)
Lp a 4 meters = 95 dB(A) - 20 dB(A) = 75 dB(A)
PLEASE NOTE:
the symbol
according to 2000/14/CE directive.
GE 4500 HBS / GE 4500 HBS-AVR
4.9 kVA (4.4 kW) / 230 V / 21.3 A
4 kVA (3.6 kW) / 230 V / 17.4 A
50 Hz
0.9
self-excited, self-regulated, brushless
synchronous, single-phase
H
HONDA / GX 270
Petrol 4-Stroke OHV/ Air
1 / 270 cm
5.7 kW (7.7 HP)
4.6 kW (6.2 HP)
3000 rpm
1.6 l/h
1.1 l
recoil
5.3 l
3.3 h
IP 23
785x440x490
56 Kg
96 dB(A) (71 dB(A) @ 7 m)
ACOUSTIC POWER LEVEL
)
- Measure Unit dB(A):
WA
it measures the pressure originated by sound waves emission. Its value changes
when with acoustic noise values, indicates that the device respects noise emission limits
2000 / 14 / CE
(With brush - AVR Vers)
3
2000 / 14 / CE
OUTPUT
it stands for acoustic noise released in a certain delay of time. This is not
Lp a 7 meters = 95 dB(A) - 25 dB(A) = 70 dB(A)
Lp a 10 meters = 95 dB(A) - 28 dB(A) = 67 dB(A)
GE 4500 HBS
GE 4500 HBS-AVR
M
1.5
REV.2-05/12
Tabla de contenido
