Rear Panel - ION Total PA Supreme Guia Del Usuario

Features

Rear Panel

1. Media Panel: Button controls for the
USB/SD, FM radio, and Bluetooth audio
sources. These controls include mode
selection and playback options.
Note: A USB drive or SD card must
contain playable files in order for it to
appear properly in the media panel's
display.
2. USB Port: Connect your USB flash drive
here to play music. You can also use this
port for charging a USB device.
3. SD Card Slot: Insert your SD card here
to play music.
4. Display: Shows
modes: USB/SD,
Bluetooth. The icon for the currently
selected mode will be illuminated on the
Display.
Note: The Display comes with a plastic
protector on it. Remove this for optimal
viewing.
5. Mic Inputs (1/4" / 6.35 mm & XLR):
Connect a dynamic microphone to the
1/4" (6.35 mm) or XLR inputs. Control
the volume of the inputs using the Mic
Input Volume knobs.
6. Mic Input Volume Buttons: Press these buttons to increase or decrease the volume of the respective
input.
7. Aux Input (1/8" / 3.5 mm): Connect a CD player, digital media player, or other audio source to this 1/8"
(3.5 mm) stereo auxiliary input. Control the volume using the Aux Input Volume knob.
8. XLR Input (XLR): Connect a line-level mixer or musical instrument to this XLR line-level input. Control the
volume using the Aux Input Volume knob. Use this line-level input when linking together two Total PA
Supreme units.
9. Aux Input Volume Buttons: Press these buttons to increase or decrease the input volume of the Aux
Input and XLR Input.
10. Mix Out (XLR): Connect this XLR output to another active (powered) speaker. The level of the output is
controlled by the Mic Input Volume Buttons, Aux Input Volume Buttons, and Master Volume.
11. Mic Echo: Use this knob to increase or decrease the echo effect on the Mic Inputs.
12. Low EQ: Increases or decreases the low (bass) frequencies for Mic Inputs, Aux Input, and Media
Panel audio sources at a range between -12 dB to +12 dB.
13. High EQ: Increases or decreases the high (treble) frequencies for the Mic Inputs, Aux Input, and Media
Panel audio sources at a range between -12 dB to +12 dB.
14. Master Volume: Turn this knob to adjust the overall output volume of the loudspeaker.
15. Power LED: Indicates whether Total PA Supreme is powered on or off.
the Media Panel
FM radio, and
2
1
12
11
6
5 5
5
5
4
13 14
15
6
9
7
8
10
3
16
17
18
5