Mitsubishi Electric City Mulri PLFY-P VBM-E Serie Manual De Instalación página 8

4. Electrical work
4.7. How to set the fi xed up/down air direction (Only for
wired remote controller)
• For PLFY-BM, only the particular outlet can be fixed to certain direction with
the procedures below. Once fixed, only the set outlet is fixed every time air
conditioner is turned on. (Other outlets follow UP/DOWN air direction setting of
the remote controller.)
Explanation of word
• "Address No. of indoor unit" is the number given to each air conditioner.
• "Outlet No." is the number given to each outlet of air conditioner.
(Refer to the right.)
• "Up/Down air direction" is the direction (angle) to fi x.
Reset 1 2
horizontal
Operation buttons (During the fi xed airfl ow direction mode)
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
OPERATION
PAR-21MAA CLOCK
Mode button (Return button)
Moves between the selected(blinking)
parts.
Outlet No.
Set temperature buttons
Changes the selection(No.).
Outlet No. Up/Down air direction
"1-4"or "0"
8
3 4 5
ON/OFF button
Resets the fixed airflow direction mode.
Fan Speed button
ON/OFF
FILTER Filter button
(<Enter> button)
CHECK TEST
Sends the information on
CLEAR
remote controller display.
Check button (Clear button)
·Refer to the next page for details.
Up/Down air direction Address No. of indoor unit
Down Up
Address No. of indoor unit
5 steps or "01-50"
cancel
Horizontal airflow
Remote controller setting
The airflow direction of
this outlet is controlled by
the airflow direction setting of
remote contoller.
Outlet No.3
Outlet No.2
Note: "0" indicates all outlets.
Press the button with either Address No. of
indoor unit or outlet No. blinking, ...
Press for 2
Only the air conditioner with the No. on remote
seconds to
controller and its outlet are set to the setting 5 of
change / cancel
the airflow direction. (Other outlets are closed.)
"Fixed airflow
It is used to identify the air conditioner and
direction mode".
outlet to set.
Press the button with Up/Down air direction
indicater which is blinking
Attention
Only the air conditioner with the No. on Remote controller
and its outlet are fixed at "Up/Down air direction"
which is blinking.
This is used only to decide direction conclusively.
Attention: Be careful not to set wrong air conditioner.
Downward
Fixed setting
The airflow direction of
this outlet is fixed
in particular direction.
When it is cold because of direct airflow,
the airflow direction can be fixed
horizontally to avoid direct airflow.
Outlet No.4
MITSUBISHI
ELECTRIC
label
Outlet No.1