Specifications - Stihl HSA 66 Manual De Instrucciones

English
Defintions
1. Control Handle
The handle of the hedge trimmer
held by the rear hand.
2. Trigger Switch Lockout
Must be depressed before the
trigger switch can be activated.
3. Trigger Switch
Switches the motor on and off and
controls the speed of the motor.
4. Retaining Latch
Locks or unlocks the trigger switch.
5. Battery Compartment
Accommodates the battery in the
unit.
6. Switch Lever
Designed so that the cutting blades
can only be activated if both it and
the trigger switch are
simultaneously in the depressed
position. Located next to the front
handle.
7. Loop Handle
For easy control of machine during
cutting work.
8. Hand Guard
Limits useable grip area for front
hand away from cutting blades.
Helps protect hand from cuttings.
9. Battery Locking Tabs
Secure the battery in the unit.
10. Battery
Supplies the motor with electrical
power.
22
11. Light Emitting Diodes (LED) on
Battery
Indicate the state of charge and
operating condition of the battery.
12. Push Button
For activating light emitting diodes
(LED) on battery.
13. Blade Scabbard
Covers cutting blades when hedge
trimmer is not in use.
14. Cutting Blades
Steel blades for cutting hedges and
shrubs.
15. Charger
Charges the battery.
16. Light Emitting Diode (LED) on
Charger
Indicates charger operating mode
and certain problems.
17. Power Supply Cord
Supplies electric current to charger.

Specifications

Battery
Model: Lithium-ion
The unit can be operated only with
original STIHL rechargeable batteries.
Running time is dependent on the
energy content of the battery.
Charger
AL 100
Power supply: 120 V / 60 Hz
Rated current: 1.3 A
Power consumption: 75 W
Charge current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Power supply: 120 V / 60 Hz
Rated current: 4.7 A
Power consumption: 330 W
Charge current: 6.5 A
Insulation: II, E (double
insulated)
AL 500
Power supply: 120 V / 60 Hz
Rated current: 4.8 A
Power consumption: 570 W
Charge current: 12 A
Insulation: II, E (double
insulated)
HSA 66