Honeywell RTH6350 Serie Manual De Funcionamiento página 24

Operating Manual
In case of difficulty About your new thermostat
Heating or cooling
system does not
respond
"Cool On" or
"Heat On" is
flashing
Other problems
69-2415ES—07
• Press SYSTEM button to set system to Heat. Make sure the temperature is
set higher than the Inside temperature.
• Press SYSTEM button to set system to Cool. Make sure the temperature is
set lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Wait 5 minutes for the system to respond.
• Compressor protection feature is engaged. Wait 5 minutes for the system to
restart safely, without damage to the compressor (see page 14).
• If the above measures do not resolve the problem, check the In Case of
Difficulty section in your thermostat Installation Guide .
22