Optional Ac Adapter - Brother P-Touch 2600 Guía De Usuario

2 If batteries are already installed, remove them.
3 Insert eight new AA alkaline batteries, making sure that their poles point in the correct direction.
4 Attach the battery compartment cover.

Be sure to insert the new batteries within five minutes of removing the old ones,
otherwise the text shown in the display and any text files stored in the memory will
be lost (unless the machine is plugged into an AC outlet with the AC adapter).
Remove the batteries and disconnect the AC adapter if you do not intend to use this
machine for an extended period of time. When the power is disconnected, all text
shown in the display and stored in the memory will be lost.
If the batteries are not installed with their positive and negative poles pointing in
the correct direction, the batteries may leak, overheat or burst, or the print head
may overheat.
The AC adapter (model AD-60) allows you to use this machine wherever there is an electrical outlet.
To connect the optional AC adapter:
1 Insert the plug on the adapter cord into the connector marked DC IN 9.5V on the right
side of the machine.
2 Insert the plug on the adapter into the nearest standard electrical outlet.

Only use the AC adapter designed exclusively for this machine.
Remove the batteries and disconnect the AC adapter if you do not intend to use this
machine for an extended period of time. When the power is disconnected, all text
shown in the display and stored in the memory will be lost.
When the AC adapter is connected, unplugging the adapter from the electrical out-
let before unplugging it from the machine can delete all text files in the memory,
even if batteries are installed.
4

OPTIONAL AC ADAPTER