Lutron HomeWorks HRP5-120 Instrucciones Para La Instalación Y Para El Uso página 7

Processor Board Connections
1
RS-232 Ports
(Links 3 and 7)
PIN Name Description
1 DCD Data Carrier Detect
2 TXD Transmit Data
3 RXD Receive Data
4 DSR Data Set Ready
5 GND Ground
6 DTR Data Terminal Ready
7 CTS Clear to Send
8 RTS Request to Send
9 RI Ring Indicate
1. RS-232 Port (Link 3 and 7): Standard 9-Pin male
connectors for connecting to a computer for programming,
to a modem for remote programming, or to an external
control system (A/V system, HVAC, etc.).
2. Ethernet Jack (Link 9): Standard 8-Pin RJ-45 jack for
connecting the processor to an Ethernet Hub/Switch, to a
laptop computer for remote programming, or to an
external control system (A/V system, HVAC, etc.).
3. Inter-Processor Link (Link 2): Allows up to 16
processors (both RF and Wired) to be connected together.
4. Contact Closure Inputs: Connection for 3 dry contact
closures plus common.
3
Inter-Processor
Link (Link 2)
2
Ethernet Port (Link 9)
PIN Processor Ethernet Hub/Switch
1 Transmit +ve Receive +ve
2 Transmit -ve Receive -ve
3 Receive +ve Transmit +ve
4 No Connection No Connection
5 No Connection No Connection
6 Receive -ve Transmit -ve
7 No Connection No Connection
8 No Connection No Connection
Crossover Cable Configuration
A crossover cable is used when
connecting the processor to a laptop
or other non-hub device (a/v systems,
HVAC, etc.)
4
Contact
Closure Inputs
5
Hybrid Repeater
Link (Link 8)
Configuration DIP Switches
DIP Switch
1
2
3
4
5
6
1 1
2 2
3 3
4 NC NC 4
5 NC NC 5
6 6
7 NC NC 7
8 NC NC 8
5. Hybrid Repeater Link (Link 8): Allows connection of
Hybrid Repeaters.
6. Configuration DIP Switches: All DIP switches should
be placed in the OFF (left) position for normal operation.
The HomeWorks utility will prompt the programmer if any
subsequent changes to the DIP switches are required.
7. Power Input Jack: Input jack for the 15 V- adapter.
Center pin is positive.
8. Initialize Button: Used to reset the processor.
7
Power Input Jack
8
Initialize Button
6
OFF ON
Normal Mode Boot Mode
User-Configured 9600 Baud
Baud Rate
Normal Mode Not Used
Normal Mode Not Used
Normal Mode Not Used
Normal Mode Not Used
Example: Setting Switch #6 ON.
OFF - Left
ON - Right
7