1. Place the microwave oven unit on top of the universal
connector brackets and fasten in place using three
screws per side in the outside set of holes (A). Tighten
the screws securely, but do not overtighten.
Note: The existing screws in the microwave base help
with alignment. When lowering the microwave into
place on the universal connector bracket allow these
screw heads to slide into the slots as shown in the
illustration below. The screw nearest the front of the
microwave slides into the base of the slope at the front
of the bracket.
2. Continue with the unit installation in the section below
describing installation of the warming drawer
microwave/steam oven unit into the wall cabinet.
Mounting the Steam Oven on the Warming
Drawer
Note: Do not place the warming drawer into the wall cabi-
net until after mounting the steam oven on it using the uni-
versal connector brackets.
A
1. Attach both universal connector brackets to the
warming drawer housing using six of the screws
provided.
2. Mount using the holes to the inside of the unit. Tighten
screws securely, but do not overtighten.
Note: The universal connector brackets are interchange-
able for the left and right sides of the warming drawer. Be
sure the taller vertical edge of the bracket is positioned to
the outside of the warming drawer.
3. Place the steam oven unit on top of the universal
connector brackets and fasten in place using two
screws per side in the inside set of holes (B). Tighten
the screws securely, but do not overtighten.
Note: The existing screws in the sides of the steam
oven base help with alignment. When lowering the
steam oven into place on the universal connector
bracket allow these screw heads to slide into the slots
as shown in the illustration below. The screw nearest
the front of the steam oven slides into the base of the
slope at the front of the bracket.
4. Continue with the unit installation in the following
sections on electrical connection and installing the
steam oven/warming drawer unit into the wall cabinet.
B
English 5