Display
The display shows the following information:
7.1:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample 2.05 ). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
• Selected drying time
After selecting a drying programme, the
drying time is displayed in minutes or in
hours and minutes (e.g. 130 mins =
2.10 ). After the programme has started
the time remaining is updated every mi-
nute.
• Delayed start
The Selected delay set by pressing the rel-
evant button appears on the display for
few seconds, then the duration of the se-
lected programme is displayed again.
• Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for exam-
ple E20 (see paragraph «What to do if...»).
• Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom
of the display for a few seconds and the
7.3
7.4
7.2
integrated red light of button 8 start flash-
ing.
• End of programme
When the programme has finished three
flashing zeros are displayed, the pilot light
9 and the pilot light of button 8 go out
and the door can be opened.
7.2: Washing programme phase icons
• Wash
• Rinses
• Drain
• Spin
• Dry
By selecting the wash programme, the
washing programme phase icons corre-
sponding to the various phases making up
the programme are shown in the bottom
part of the display. After having pressed but-
ton 8 only the icon of the running phase
stays on.
7.3: Soil degree icons
• Intensive
• Normal
• Daily
• Light
• Quick
• Super Quick
• Refresh
• Super Refresh
When selecting a programme on the dis-
play appears an icon indicating the degree
7.1
electrolux 71