Engine; 29.3.1 Engine Oil Exchange; Clutch - Zipper Maschinen ZI-RD300 Manual De Instrucciones

29.3

Engine

Information about engine maintenance you can find in operation manual of the engine manufacturer!

29.3.1 Engine oil exchange

The engine oil change would be explicitly mentioned here in order to be included in the machine
operating manual. Oil change interval after the first 20h or 1 month after commissioning and then
every 100h or 1x per year.
Waste oils are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
29.4

Clutch

As clutch wears out, the same lever could have a wider opening, being so uneasy to use. To enable
proper operation, the clutch cable must be adjusted:
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RD300
1. Remove the oil drain plug (1) from the engine.
2. Open the oil tank cap (2). Collect the draining oil in a
collection container and dispose of it properly.
3. Retighten the oil drain plug after draining.
4. Fill in fresh oil through the filling opening (3) (see
section Checking the engine oil level).
5. Use only high quality engine oil, e.g: SAE30, 15W40 or
similar!
Drain the used oil when the engine is warm.
Warm oil drains quickly and completely.
1. Loosen the jam nut (1) by turning it counter clockwise with 10
mm wrench.
2. The clutch lever is set to the original position with the adjusting
nut (2).
3. Then retighten the lock nut (1).
NOTICE
NOTICE
MAINTENANCE
35