Battery Charging - Stocker 301 Manual De Instrucciones

6
Assemble the hose-reel (85) onto the support (79) by fastening it with the pivots, washers and
cotter pins as shown in the picture. (82+81+80).
6
Pass the connecting tube between the reel and the pressure regulator (78) through the
dedicated loops, located under the chassis of the cart. Connect the joint to the tube (74) and
then connect it to the pressure regulator (71).
68
Art. 301 / Art. 302
Wheelbarrow battery pump 40 L and 60 L
Assembly of the hose reel
Connection of the hydraulic-system
Art. 301 / Art. 302
Wheelbarrow battery pump 40 L and 60 L
Usage
Warning!

Battery charging

Before using or recharging the batteries, make sure that the
battery and the battery charger are both dry. Make sure that the
input parameters of charger comply with the AC parameters of
mains supply. If not, please contact the distributor. The battery
of sprayer has been fully charged before being delivered. Due to
self-discharge during transportation and storage, you shall check
the power level with the voltage meter before operation. When
the charging indicator light turns green it means the battery is fully charged.
Only use batteries and chargers supplied by Stocker.
Voltmeter
The sprayer is equipped with a high-precision voltmeter
measuring voltage of 11V - 15V. The green area of color scale
indicates full battery, fit for normal operation; yellow area
indicates insufficient voltage but the system can still keep
working; the red area on the left indicates extremely low power
requiring immediate recharging. The graduation and value above
the color scale indicate the percent of residual power against
the full power. If the pump has only been used for a short time, it is not necessary to recharge
it. If it has remained unused for a long time, it is necessary to completely discharge the battery
and then recharge it. It is recommended to charge and discharge the battery at regular intervals
(once or twice a month) in order to preserve optimal operating conditions.
Attention: while on charge, the voltmeter indicates a value of 14 V. The charging value during
use of the pump is from 12 to 14 V.
For further information about the product, please contact [email protected].
Sign up to our newsletter and keep up to date with our latest news [email protected]
7
69