Main Board Wiring Connections - Mettler Toledo IND560 PDX Guia De Instalacion

IND560 PDX Installation Manual
•
Cable shielding should be grounded to the IND560 PDX's enclosure by
spreading the shield wires as shown at the top of Figure 2-15, then folding
them back over the plastic component of the cable gland before pressing it into
the threaded body.

Main Board Wiring Connections

Once the IND560 PDX terminal harsh enclosure is open, connections can be made
to the terminal strips on the main board, as shown in Figure 2-16.
SW1
COM4
PDX Cell
AC power
2-10
Figure 2-15: Cable Shield Grounding
Figure 2-16: Main Board in Harsh Enclosure
W3
Jumper
COM1
+24V
SW2