Mettler Toledo IND560 PDX Guia De Instalacion página 27

either of them is set to OFF, EEPROM data is preserved. Refer to Chapter 4 of this
manual, Service and Maintenance, for details on performing a master reset.
Fill-560
The Fill-560 is a special application that can be added to the IND560 PDX
terminal to provide additional filling and dosing control. It provides control for the
following combinations of weigh-in and weigh-out sequences.
Fill only
•
Fill and dump
•
Dose out only
•
Additional information can be found in the Fill-560 Technical Manual on the
documentation CD that accompanies the Fill-560 software kit.
COM-560
The COM-560 option is a specialized software module solution focused on the
needs of users utilizing legacy communication protocols or that have special
command requirements. An IND560 PDX with COM-560 installed maintains all of
the standard features and functions of the IND560 PDX in addition to the specific
features and functions of the COM-560. It provides the following features and
functions:
Custom ASCII command template
•
Mettler Toledo Continuous Short output
•
8142 Host Protocol
•
Additional information can be found in the COM-560 Technical Manual on the
module's documentation CD.
Drive-560
The Drive-560 option is a specialized application solution focused on simple
inbound-outbound vehicle weighing requirements. An IND560 PDX with Drive-560
has two modes of operation: Temporary Tare ID Weighing and Permanent Tare ID
Weighing. Some features of this software include:
Ability to store up to 100 Permanent Tare IDs
•
Totalization of Permanent Tare IDs
•
One-Step processing of Temporary IDs
•
Reprint of previous transaction ticket
•
Storage of up to 2000 transactions
•
Additional information can be found in the Drive-560 Technical Manual on the
documentation CD that accompanies the Drive-560 application software.
IND560 PDX Installation Manual
Fill and dose out
•
Blend only
•
Blend and dump
•
8530 Host Protocol
•
PT6S3 Protocol
•
Blend and dose out
•
1-13