Denon AVR-391 Manual Del Usuario página 39

Setting items
n In the PLgx or PLg mode
Mode
Set the play modes for the
Cinema : Surround sound mode optimized for movie sources.
different surround modes.
Music : Surround sound mode optimized for music sources.
Game : Surround sound mode optimized for games.
Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
n In the DTS NEO:6 mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
The "Music" mode is also effective for movie sources including a lot
of stereo music.
LFE –10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : "0dB"
• DTS movie sources : "0dB"
• DTS music sources : "–10dB"
Center Image 0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
Panorama ON : Set.
Assign front L/R signal also OFF : Do not set.
to surround channels for
wider sound.
Dimension 0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
Center Width 0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
AFDM ON : Set.
(Auto fl ag detect mode) OFF : Do not set.
Detect the source's
[Example] Playing Dolby Digital software (with EX fl ag)
surround back channel
• When "AFDM" is set to "ON", the surround mode is automatically set
signal and set the
to the DOLBY D + PLgx C mode.
optimum surround mode
• To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and
automatically.
"Surround Parameter" – "SB CH OUT" to "MTRX ON".
Some Dolby Digital EX sources do not include EX fl ags. If the playback
mode does not switch automatically even when "AFDM" is set to
"ON", set "Surround Parameter" – "SB CH OUT" to "MTRX ON" or
"PLgx CINEMA".
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
D.Comp Low / Mid / High : These set the compression level.
Compress dynamic range OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
DRC Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range the source. This can be set in the Dolby TrueHD mode.
(difference between loud Low / Mid / High : These set the compression level.
and soft sounds). OFF : Dynamic range compression is always off.
n For 2-channel sources
SB CH OUT
Sets the method of
ON : The surround back channel is used.
generating of the surround
OFF : No signal is played from the surround back channels.
back channel.
n For Multi-channel sources
Set the decoding method for the surround back channel.
This can also be set by
STANDARD DSCRT ON : Play the surround back signals included in the 7.1-channel
pressing on
the main unit. source.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
z1
ES MTRX
surround channel signals of the DTS source.
ES DSCRT
6.1-channel DTS source.
NOTE
PLgx CINEMA
decoding the signals in the Dolby Pro Logic gx Cinema mode.
If the setting in "Speaker
PLgx MUSIC : Generate and play the surround back signals by
Confi g." – "S.B(Pre)"
decoding the signals in the Dolby Pro Logic gx Music mode.
(vpage 7) is "None", "SB
CH OUT" is not displayed.
OFF : Do not play the surround back channel.
z1 This can be selected when playing DTS sources.
z2 This can be selected when playing DTS sources including a signal to
identify discrete 6.1-channel signals.
z3 This can be selected when "Speaker Confi g." – "S.B(Pre)" (vpage 7)
is set to other than "None".
If the source being played contains a surround back signal, the decoder
type is automatically selected by the AFDM function. Set "AFDM" to
"OFF" to switch to your preferred decoder.
Subwoofer ON : The subwoofer is used.
Turn subwoofer output on OFF : The subwoofer is not used.
and off.
NOTE
This can be set when the surround mode is "DIRECT" (vpage 44, 45), and
the "Mode" (vpage 8) is "LFE+Main".
Default Yes : Reset to the defaults.
The "Surround Parameter" No : Do not reset to the defaults.
settings are returned to the
default settings.
Confi rm the setting
Adjusting the sound fi eld effects
Setting details
: Generate and play the surround back signals from the
z2
: Play the surround back signals included in the
z3
: Generate and play the surround back signals by
Return to previous menu
ENGLISH
35