4.5 INSTANTANEOUS POWER INDICATOR
This graphic provides an immediate indication of appliance
power use (each sector represents 20% of the power).
GB
IMPORTANT: In case of power down due to a black-out, all
current settings are kept in memory with the exception of
date and time.
If the power black-out occurs in "Chrono" mode, when power
is restored, the appliance resumes functioning in "Energy
Saving" mode.
IMPORTANT: If the appliance remains without power while
the "Overdrive (2h)" function is enabled, the date and time
settings are lost. When power is restored, the appliance
exits the function and resumes functioning in the mode se-
lected previously.
IMPORTANT: In case of power down while the "Holiday"
function is enabled, when restored, the function remains
active and the countdown of days to the end of the holiday
resumes from the moment of its stop.
IMPORTANT: In case of power down while the "ASC" func-
tion is enabled, when restored, the function remains active
but a few days will be required for it to become fully opera-
tional.
7. TROUBLESHOOTING
The appliance does not heat up. • Check if the appliance is correctly connected to the mains power grid and powered.
The appliance heats
continuously.
• Check the position of the mains switch of the installation.
• Increase the temperature set point on the appliance regulator.
• The safety device has tripped. Eliminate the cause of overheating (for
example, obstructions or covering).
• Disconnect the appliance from the household mains for a few minutes to reset the electronic
system.
• If it still does not heat up, contact your local dealer or a qualified professional.
• Reduce the temperature set point on the appliance regulator.
• Make sure there are no garments covering the control device or temperature sensor.
• Make sure the "Overdrive (2h)" function has not been activated accidentally.
• If it continues to heat, contact your local dealer or a qualified professional.
22
5. CLEANING
Before cleaning, make sure the appliance is turned
off, cold and disconnected from the household
mains.
To clean, just wipe with a soft damp cloth and
neutral detergent. Never use abrasive or corrosive
cleaning products or solvents.
To maintain efficiency, remove the dust from the
surface and inside of the appliance at least twice a
year using a vacuum cleaner.
6. MAINTENANCE
Should any technical problems arise, contact a
qualified professional (recognised or authorised
by the dealer or manufacturer) or your local dealer.
All operations on the appliance must be carried
out by a qualified professional who before per-
forming maintenance must make sure the appli-
ance is turned off, cold and disconnected from the
household mains.
The appliance contains a precise quantity of spe-
cial fluid. All repairs requiring the appliance to be
opened must be performed by a qualified profes-
sional.
In the event of fluid leaks, contact your local dealer
or a qualified professional.