Wolder miTab freedom Manual De Instrucciones página 12

• Do not disassemble the tablet for yourself. This device must be manipulated by
quali ed personnel.
• Do not use alcohol, thinner or benzene to clean miTab.
• Do not use the tablet in place in which the use of electronic devices is restricted.
• Do not use miTab while driving or walk down the street.
Charge and use of the battery
Remember that it is recommended to fully charge the battery of your tablet before
rst use. To do this, simply plug the adapter or the USB cable to your tablet and plug
it into the wall outlet. For the rst two loads, you will need at least 6 hours. Then, with
just 4 hours will be enough.
【NOTE】 :
During charging, the battery icon appears on the screen moving. When
the battery is fully charged, the icon will remain static.
【NOTE】 :
To ensure a longer life to your battery, it is advisable to consume it
completely before recharging. What's more, in the event that you will not use the
tablet for a long period of time, charge and use the tablet once a month. This way you
will avoid damage to the battery. 2. When the battery is fully consumed, connect the
adapter and wait a few moments before it has enough charge to access the main
menu. 3. While charging the battery, the unit goes into standby mode until it has
su cient charge. The screen consumes a considerable amount of energy, so the
charging time will be greater if it stays on during charging. When the tablet is on, you
can turn o to save battery. Just press the power button once to turn o the screen.
Press again the power button to turn on the screen.
Status and noti cation icons
Your tablet will tell you what's going on by showing you simple icons. Here's what
they mean:
USB connected
Battery charge
Mute mode
Wi-Fi network
New Wi-Fi netwotk detected
? ?