Brink 2988 Instrucciones De Montaje página 7

Idiomas disponibles

NOTE:

* Remove the insulating material from the contact area of the fitting points.

* All bolts are quality 8.8 - nuts 8. or when mentioned in fitting instructions

10.9 / 10.

* Don't forget the spring- and plain washers.

* Consult your dealer for the maximum tolerated pull weight and

ball hitch pressure of your vehicle.

* It is recommendable to retighten all fixing bolts and nuts after the towbar

has been in use for some 1000 km/600 miles.

* Do not drill through brake-or fuellines.

* Remove (if present) the plastic caps from the spot welding nuts.