Stenner Pumps CLASSIC Serie Manual De Instalación Y Mantenimiento página 18

INSTALLATION
SPILL RECOVERY
Mount the pump vertically and use the spill recovery to drain chemical back to the tank in
the event of tube failure. This will help prevent chemical from collecting in the tube housing
and reduces spillage on the floor.
The pump motor is ventilated and water intrusion can cause motor damage. A rain roof is
recommended for outdoor and wet environments.
Partial hole is punched through
with a #2 Phillips head screwdriver,
7/32" punch or drill.
Use section of 1/4"
suction/discharge tubing
and insert in hole.
18
continued
Tube drains solution
back to tank.
Strainer with Weight
www.stenner.com
Spill Recovery
3"