Check - Carrier 42PQV S Serie Manual De Instalación

42PQV ...S

Check

• Next, check the unit drain system by pouring some water into
the unit drain pan and ensuring that it flows freely through the
drain hose and that there is no leakage from any other part.
Use of additional screws
After installation, if there is a significant gap between the unit and
wall, it can be adjusted by securing the body to the wall hanging
bracket using 2 screws. Screw holes can be only seen after
removing the frame grille.
Installing the remote control bracket
• Fix the bracket onto the wall using double sided adhesive tape or
screw.
• Install the batteries in the remote control and position it in the
bracket.
E N G L I S H
300 mm
min.
Remote control
bracket
Grille
Front panel
GB - 9