Operating On-Screen Menu; How To Operate On-Screen Menu; Flow Of On-Screen Menu Operation; Menu Bar - Sanyo PLC-SE10 Manual Del Propietário

OPERATING ON-SCREEN MENU

You can control and adjust this projector through ON-SCREEN
MENU. Refer to the following pages to operate each adjustment
on ON-SCREEN MENU.
1 DISPLAY MENU
Press MENU button to display ON-SCREEN MENU.
2 MOVING POINTER
Move the pointer ( ✽ see below) or adjust the value of item by
pressing POINT button(s) on Top Control or on Remote Control
Unit.
✽ Pointer is the icon on ON-SCREEN MENU to select the item.
See the figures on the section "FLOW OF ON-SCREEN MENU
OPERATION" below.
3 SELECT ITEM
Select the item or set the selected function by pressing SELECT
button.

FLOW OF ON-SCREEN MENU OPERATION

Display ON-SCREEN MENU
1 Press MENU button to display ON-SCREEN MENU (MENU
BAR). A red frame is POINTER.
Select Menu to be adjusted
2
Move POINTER (red frame) to MENU ICON that you want to
select by pressing POINT RIGHT / LEFT buttons.
Control or adjust item through ON-SCREEN MENU
3 Press POINT DOWN button and move POINTER (red frame
or red arrow) to ITEM that you want to adjust, and then press
SELECT button to show ITEM DATA.
4
Adjust ITEM DATA by pressing POINT RIGHT / LEFT
buttons.
Refer to the following pages for details of respective
adjustments.

HOW TO OPERATE ON-SCREEN MENU

BEFORE OPERATION
REMOTE CONTROL UNIT
ON -- OFF
TOP CONTROL
VOLUME – VOLUME +
MENU SELECT

MENU BAR

POINTER (red frame)
Press POINT DOWN button to
move POINTER.
ITEM
SELECT
BUTTON
ITEM DATA
Press POINT LEFT/RIGHT
buttons to adjust value or
set function.
POINT BUTTON
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
SELECT BUTTON
Used to select the item.
POINT BUTTONS
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
SELECT BUTTON
Used to select the item.
MENU ICON
POINTER
(red frame)
17