Preparing Food; Chopping; Remove Food - Silvercrest SSDMD 600 A1 Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74

7.1 Preparing food

WARNING! Risk of material dam-
age!
Thick or firm peels, (e.g. of citrus fruits,
pineapple), stems and pips of stone
fruits (e.g. cherries, peaches, apricots)
must be removed before blending.
• Rinse or wash the food.
• Cut up larger food items (e.g. apples,
pears) into small pieces. This will short-
en the mixing time.
• If you want to add food through the refill
opening while working, cut the food up
until it is so small that it fits through the
refill opening of the lid 2.
• Free herbs from their stems.
• For smoothies, use a sufficient amount
of liquid (mineral water, juice, milk, yo-
ghurt).

7.2 Chopping

• To chop up food, turn the control dial 9
to the desired speed between the mark-
ings 1 and 5.
• To ensure safety, hold the device tightly
by the closed lid 2 during operation.
• Ingredients and liquids can also be add-
ed during operation via the refill open-
ing of the lid 2.
Harder food and crushed ice
NOTES:
• Only a maximum of 200 g of nuts may
be chopped up.
• Due to their exceptional hardness nut-
megs may not be chopped.
1. Fill food into the blender jug 4.
2. For chopping up harder food, repeat-
edly turn the control dial shortly to the
left to P. The number and length of the
pulses, which will be required to
achieve the desired consistency, will
22 GB
depend on the quantity and consisten-
cy of the food.

7.3 Remove food

NOTE: do not store foodstuffs in the blender
jug 4 or in contact with other product parts
for longer than 24 hours. This also applies
to storage in the refrigerator.
1. Turn the control dial 9 until the marking
stripe points to 0.
2. Once the motor has come to a com-
plete standstill, remove the blender
jug 4 from the motor block 7.
To do this, turn the arrow
bol
and then lift the blender jug 4
straight up.
3. To unlock, turn the lid 2 anticlockwise
and then lift it upwards.
4. Empty the blender jug 4.
5. Clean the device as soon as possible
after use.
to the sym-
Tabla de contenido

Solución de problemas

loading

Tabla de contenido