Technical Information; Installation Considerations - Hansgrohe Raindance Connect 27164 1 Serie Instrucciones De Montaje / Manejo / Garantía

Tools Required / Outiles Utiles /
Herramientas Útiles
3 mm
8 mm
2
English

Technical Information

Flow rate - showerhead
Flow rate - handshower

Installation Considerations

• For best results, Hansgrohe recommends that
• Please read over these instructions thoroughly be-
• The installer should be sure that the mounting
• The included mounting hardware is suitable for
• This unit does not include a water supply. Use
A.112.18.1
• Do not use the showerpipe as a grab
• The shower arm is intended to support
• To prevent scald injury, the maximum output tem-
6 mm
• Keep this booklet and the receipt (or other proof
this unit be installed by a licensed, professional
plumber.
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
location for this product is flat (no projecting
joints or tiles) and that the wall is suitable for the
installation of this product.
solid surface walls, such as concrete, concrete
wallboard, dense natural stone, brick, gypsum
wallboard/plaster fiberboard surfaced with tile,
marble, or stone
Hansgrohe model 27458xx3 or another sup-
ply that complies with ASME A112.18.1/CSA
B215.1 including ASME A112.18.3.
bar.
only the showerhead. Do not use the
shower arm to support other items.
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
2.5 GPM
2.5 GPM