Making Ice Cream - Unold 48855 Instrucciones De Uso

DE

MAKING ICE CREAM

EN
The desired ingredients should have already been pre-cooled for several hours
prior to preparation! If you are using alcohol for the recipe, please only add it to
FR
the ice cream when the ice cream has the desired consistency. The maximum fill
NL
quantity for the cooling container is 500 ml.
Tip: If you are using a recipe with alcohol, only use a little alcohol and only add
IT
it at the end of the freezing time because the alcohol extends the freezing time.
ES
1. Prepare the ice cream mixture as specified in the recipes in the recipe sec-
PL
tion. If the ice cream mixture must be boiled, this should be done a day in
advance so that the mixture has time to cool thoroughly.
2. We recommend that you always thoroughly cool the ice cream mixture in the
refrigerator before use.
3. Take the cooling container out of the freezer compartment.
4. Place the cooling container in the cooling container insert.
5. Then place the cooling container insert with cooling container in the housing
of the appliance.
6. If necessary, fit the axle onto the mixer. Ensure that both parts are correctly
connected – the side of the axle with the two little arms must be attached
in the direction of the mixer.
7. Fasten the motor on the lid and carefully place both on the appliance.
8. Insert the axle in the opening on the underside of the motor.
9. The motor can only be correctly fixed in place on the lid in one direction
(see Fig.).
30 von 108
Copyright UNOLD AG | www.unold.de
Stand 12.3.2020