Safety Notes And Precautions; Environmentally Safe Battery Disposal; Battery Charger - Stiga BT 48 Li 2.0 Manual De Instrucciones

2 Green The battery is at 45% capacity
Lights
1 Green The battery is at 10% capacity
Light and requires charging soon
Lights go out The battery is under 10% capacity
and requires charging immediatly

SAFETY NOTES AND PRECAUTIONS

1. Do not disassemble the battery.
2. Keep away from the children.
3. Do not expose the battery to water or salt
water, battery should be stored in a cool
and dry location and should place the
battery in cool and dry environment.
4. Do not place the battery in high-temperature
locations, such as near a fire, heater, etc.
5. Do not reverse the positive terminal and
the negative terminal of the battery.
6. Do not connect the positive terminal
and the negative terminal of the battery
to each other with any metal objects.
7. Do not knock, strike or step on the battery.
8. Do not solder directly onto the
battery and pierce the battery with
nails or other edge tools.
9. In the event that the battery leaks and
the fluid gets into one's eye, do not
rub the eye. Rinse well with water.
10. Immediately discontinue use of the battery,
if, while using the battery emits an unusual
smell, feels hot, changes color, changes
shape, or appears abnormal in any other way.
11. If the supply cord is damaged,it must
be replaced bymanufacturer, its service
agent or similarly qualifiedpersons
in order to aviod a hazard.
4. ENVIRONMENTALLY SAFE
BATTERY DISPOSAL
The following toxic and corrosive
materials are in the batteries used in this
tool battery pack:
Li-ion, a toxic material.
All toxic materials must be disposed
of in a specified manner to prevent
contamination of the environment. Before
disposing of damaged or worn out
Lithiumion battery packs, contact your
local waste disposal agency, or the local
Environmental Protection Agency for
information and specific instructions. Take
the batteries to a local recycling and/or
disposal centre, certified for Li-ion disposal.
If the battery pack cracks
or breaks, with or without
leaks, do not recharge it and do not use.
Dispose of it and replace with a new battery
pack. DO NOT ATTEMPT TO REPAIR IT!
To avoid injury and risk of fire,
explosion, or electric shock, and to
avoid damage to the environment:
– Cover the battery's terminals with
heavy-duty adhesive tape.
– DO NOT attempt to remove or destroy
any of the battery pack components.
– DO NOT attempt to open the battery pack.
If a leak develops, the released
electrolytes are corrosive and toxic.
DO NOT get the solution in the eyes
or on skin, and do not swallow it.
– DO NOT place these batteries in
your regular household trash.
– DO NOT incinerate.
– DO NOT place them where they will
become part of any waste landfill
or municipal solid waste stream.
– Take them to a certified recycling
or disposal centre.

5. BATTERY CHARGER

SPECIFICATIONS
48V charger: CG 48 Li
Input: 220-240V ~ 50 Hz, 1.1A
Output: 48V
48V charger: CGF 48 Li
Input: 220-240V ~ 50 Hz, 1.3A
Output: 48V
• The apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases,
shall be placed on the apparatus.
• Charger is Li-lon rechargeable batteries.
Other types of batteries may burst and
causing injury to persons and damage.
• Specified batteries used. (The battery packs
BT 48 Li 2.0 and BT 48 Li 2.5 consists of
12 rechargeable Li-ion cells, 12 cells are
connected to a group in series.The battery
packs BT 48 Li 4.0 and BT 48 Li 5.0 consists
of 24 rechargeable Li-ion cells, 12 cells are
connected to a group in series and then two
groups are parallel. The cells SANYO made
used in battery pack BT 48 Li 2.0 and BT 48
Li 4.0 were approved by DEKRA according
to the standard IEC 62133: 2012 (Second
Edition). The CB certificate No. NL-30391
EN - 3
1.5A
4A