Components; Operation And Use; Operation - Carlo De Giorgi 640/00 Manual De Instrucciones De Uso Y Mantenimiento

ELECTROSURGICAL KNIFE

3 - COMPONENTS

The package contains:
a) power supply unit;
b) handpiece;
c) pedal;
d) cable with neutral cylindrical electrode;
e) case with n° 8 electrodes;
f) user instructions.
The appliance can be transported by hand.

4 - OPERATION AND USE

4.1 - OPERATION

The power supply/control unit must be placed on a surface next to the
operator in such a way that:
- it is in a stable position with no risk of falling;
- the handpiece lead is not subject to excessive traction, thus avoiding the
risk of breakage of internal wires or dragging of the power supply unit;
- the functional status of the appliance can be checked easily.
Connect handpiece (1) to connector (2) located on the rear of the appliance
(by inserting the handpiece connector and turning the locking ring through about
1/4 of a revolution until it stops - do not use excess force); Connect electrode (3)
to cable (4), which must be inserted in the "plate" socket (5) on the front
panel; the appliance can be activated using the button on the handpiece (1);
if you wish to activate the appliance using the pedal control (6), connect the
pedal cable to connector (7) on the rear of the appliance. Finally, insert the
plug on the power cable into a mains socket outlet.
4 3 6
1
5
7 2 8
Fig. 1
Carlo de Giorgi GB - 5