Wheels - Stihl MM 55 Manual De Instrucciones

1 2 6 5
Push additional weight (1) with bolt
N
through the hole (6) in the flange; in
the process, rotate it until the
square (2) engages in the opening
in the flange
Turn the inner weight (5) onto the
N
bolt and tighten
Fasten outer weight (4) with the
N
hexagon head bolt (3) in the thread
of the inner weight and tighten
One or two weights can be mounted on
each side of the additional weight as
needed.
Weights on Additional weight,
each side total
1 4.4 lbs. (2 kg)
2 8.8 lbs. (4 kg)
The maximum additional weight is
8.8 lbs. (4 kg). Never use higher
additional weight. This can cause
damage to the machine.
Wheels are attached to the MultiEngine
If wheels (special accessory) – see
"Wheels" – are already attached to the
MultiEngine, then additional parts are
required in order to install the additional
weight.
MM 55, MM 55 C
In this case, have the additional weight
installed by a servicing dealer.
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers.
4 3

Wheels

For convenient transport, the
MultiEngine can be retrofitted with a set
of wheels (special accessory).
Always use original STIHL wheels.
Using other wheels can lead to damage
to the machine and personal injuries.
Installing wheels
No additional weight is attached to the
MultiEngine
To simplify installation, turn the machine
so that it rests on the handles.
2 5
4
3 1 3
1
7
6
7
Insert the two sleeves (1) in the
N
frame
Push the frame onto the flange
N
English
15