Fueling; Starting / Stopping The Engine - Stihl MM 55 Manual De Instrucciones

English

Fueling

Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns or
other personal injury from escaping gas
vapor and fumes, remove the fuel filler
cap carefully so as to allow any pressure
build-up in the tank to release slowly.
After fueling, tighten fuel cap as securely
as possible by hand.
12
Starting / Stopping the
Engine
Operating elements
6 5
4
3
7
2
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Slide control positions
4 START – Start – the ignition is
switched on – the engine can be
started
5 Operating position F – Run – engine
is running or can start
6 STOP-0 – engine off – ignition is
switched off
Symbol on slide control
7 h – Stop sign and arrow – to switch
off the engine, push the slide control
in the direction of the arrow (h) to
STOP-0
Starting
Fold out bicycle handle in working
N
position – see "Adjusting the bicycle
handle"
Press the throttle trigger lockout and
N
throttle trigger in succession
Hold both triggers down
N
Move the slide control to START N
and hold it in position too
Release the throttle trigger, slide
N
control and throttle trigger lockout in
succession = starting throttle
position
1
Set the choke lever (8)
N
8
9
MM 55, MM 55 C