Cleaning; Descaling; Troubleshooting - Caso WK2200 Operación Manual

Attention
► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Do not immerse pot, base or power cord in water.

16.6 Cleaning


Pot
• Rinse the pot with a damp cloth.

Mesh
• The mesh is located it the sprout of the pot. Pull it up and wash it under running water.
Then place the mesh back correctly.

Base
• The stainless steel surface of the base can be cleaned with a commercial stainless steel
cleaning agent.

Buttons
• Clean the buttons with a damp cloth. Do not use cleaning agents.

16.7 Descaling

• Depending on the hardness of water you should descale the device once every two
weeks.
• Fill the pot with water and a commercial descaler or give a sip of vinegar into the water.
Heat the mixture to 70 °C but do not boil it to prevent overcooking. Rinse the pot with
fresh water after descaling.
Please note
► Regularly decalcifying your WK2200 will reduce the electricity used and prolong the life
of the device.

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
caso WK2200 33