Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Introduction
These Pressurepac units are complete hydraulic systems designed to provide a hydraulic tool user with a
compact source of medium pressure to high pressure hydraulic oil dependent only on the availability of 50
– 125 PSI shop air or compressed nitrogen for power. The units are complete systems in that they include
all the controls normally needed to actuate a tool through rapid approach; high force; and retract. Tools or
devices are usually either spring return, air return, or gravity return.
The Pressurepac series is particularly suited for use in difficult environments. The oil supply is securely
sealed by the bladder preventing contamination in dusty atmospheres and allowing any mounting position
on stationary or mobile equipment. The completely pneumatic power and control permits use in
hazardous or explosive type areas.
For Single Acting Hydraulic Tools:
•
Crimping/Swaging Tools (for
electrical connectors,
hydraulic hose, cables, etc.)
•
Torque Tools
•
Tensioners
•
Machine tool Clamps/Vises
•
Lab Molding Presses
•
Jacks
Description
Pressurepac Series Miniaturized Air Driven Hydraulic Power Units • OM-7S
•
Lift Tables
•
Concrete Chutes
•
Riveting/Fastening Tools
•
Cutters
•
Shears
•
Pruning Tools
•
Punches
•
•
•
•
•
¼" Plastic Tubing To:
Actuating Valve
Length* Furnished
1 Button
Toggle
2 Buttons
Solenoid
* May be extended up to 180".
2
Shop Presses
Gear Pullers
Safety Brakes
Clutches
Valve Actuators
Pressurepac Model
15"
28910
35"
29230
60"
29880
15"
29883
Tabla de contenido
