Mounting The Loop Handle - Stihl KB-KW Manual De Instrucciones

English

Mounting the Loop Handle

Position of Loop Handle
A
2
4
3
A loop handle (1) may already be
mounted to the basic power tool.
Secure the loop handle (1) at
N
distance A = about 20 cm (8 in) in
front of the control handle (2) – if the
sleeve (3) and carrying ring (4) are
already fitted, they must be between
the loop handle and control handle.
14
Mounting the Loop Handle
9
8
1
7
10
Place the clamp (5) in the loop
N
handle (1) and position them both
against the drive tube (6).
Place the clamp (7) against the
N
drive tube.
Line up the holes.
N
Fit the washers (8) on the
N
screws (9), and insert the screw in
the holes.
Turn the square nuts (10) as far as
N
stop.
Adjusting the Loop Handle
9
8
1
5
6
10
N
Distance A must not be more than
55 cm (22 in).
Recommendation: distance A:
about 35 cm (14 in)
N
A
1
Align the loop handle (1) and move
it to the most comfortable position.
Tighten down the screws on the
loop handle.
KB, KW