Seat Height Adjustment - Joycare GHIOTTONE JC- 1224 Manual De Instrucciones

SEAT HEIGHT ADJUSTMENT

Press the release tabs on both side panels, then lift the tray.
• Press on the lock A, then pull the seat outwards (Figure A).
• Slide the seat into the slits on the rear panel, to the chosen height, firmly press
until you hear a "click", indicating that it's locked (Figure B), (Figure C).
NB: the child seat belts must be positioned above the seat during the adjustment operation (Figure C).
A
INSERT THE STRAPS (figure a, b, c, d)
Please note the straps only can insert into the square hole (as arrow shown in the figure a), the
straps can not insert to any other holes.
A
TO SECURE BOOSTER SEAT
- Each booster seat with 2 straps for securing it on chair
- The buckles have been inserted into the straps (figure A)
- Adjust the buckles (figure B and C).
A
FASTEN THE BOOSTER SEAT TO THE CHAIR
• Place the booster seat on the chair, positioning it as close as possible to the chair's seatback.
• Attach it by wrapping the rear belt around the chair, doing the same with the lower belt under the
chair.
• Tighten the belts by pulling the ends until both are tight and stretched around the chair. (Figure D, E, F)
B
B
B C
C
C
GB
D
7 7