Using The Multi-Purpose; (If Applicable) (Code Dg 3010); Cleaning And Maintenance; Disposal At The End Of Life - Imetec R5902 Instrucciones De Uso

• Clean any parts that come into contact with foodstuffs immediately as described in the
chapter 'Cleaning and care'.
USING THE MULTI-PURPOSE CHOPPER ATTACHMENT
EN
WARNING! DO NOT use the chopper with liquids only.
WARNING! Risk of damage to the appliance. DO NOT insert
cheese rinds.
• Insert the blades [Fig. D].
• Fill the bowl with solid foodstuffs without exceeding the maximum level marking indicated
on the bowl.
• Fit the lid [Fig E].
• Place the motor body of the hand blender on the chopper lid, making the triangle symbol
line up with the open symbol on the lid; turn the motor casing anticlockwise until the triangle
symbol lines up with the closed symbol [Fig. F].
• Connect the power cable plug to the power socket in the wall.
• Press the start button to operate the appliance.
• At the end of the process, release the speed button used and wait for the blades to come
to a complete stop.
• Remove the plug from the power socket.
• Disconnect the motor casing from the lid and remove the lid.
• Empty the container.
• Clean any parts that come into contact with foodstuffs immediately as described in the
chapter 'Cleaning and care'.
WARNING! Always disconnect the appliance from the socket
before cleaning or performing maintenance.
Clean the accessories according to the table indicated in the chapter Cleaning before using
for the first time.
• Wipe the motor unit with a dampened and thoroughly squeezed out sponge.
• Dry with a dry cloth.
The packaging of the appliance is made of recyclable materials. Dispose of the
packaging in accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the crossed bin symbol on the appliance or its packaging indicates that the
appliance must be disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for
electrical and electronic equipment. Alternatively, instead of handling the disposal,
the user can hand over the appliance to the retailer when a new, equivalent one is
15

(IF APPLICABLE) (CODE DG 3010)

CLEANING AND MAINTENANCE

DISPOSAL AT THE END OF LIFE