Lincoln Electric SAF-RPO PRESTOMIG 185MP Manual De Instrucciones página 12

Depending on welding machine, the user can set
functions:
PRESTOMIG 185MP

The welding current

HOT START

ARC FORCE
PRESTOMIG 210MP
Basic menu

The welding current

Switch on / switch off
the output voltage on
the output lead
Welding GTAW Process (only
PRESTOMIG 210MP)
PRESTOMIG 210MP can be used to GTAW process
with DC (-). Arc ignition can be achieved only by lift TIG
method (contact ignition and lift ignition).
PRESTOMIG 210MP does not include the torch to
GTAW welding, but the one can be purchased
separately. See "Accessories" chapter.
Procedure of begin welding of GTAW process:

First turn the machine off.

Connect GTAW torch to [9] output socket.

Connect the work lead to [8] output socket.

Connect the work lead to the welding piece with the
work clamp.

Install the proper tungsten electrode in the GTAW
torch.

Turn the machine on.

Set the welding parameters.

The welding machine is now ready to weld.

By applying the principle of occupational health and
safety at welding, welding can be begun.
During welding GTAW process, the user can set
function:
SPEEDTED 210MP
Basic menu

The welding current

Switch on / switch off
the output voltage on
the output lead
Memory – Save, Recall, Delete (only
SEEDTEC 210MP)
PRESTOMIG 210MP enables saving, recalling and
deleting the parameter's settings. 9 memories can be
used by user.
Saving, recalling and deleting process settings is
accessible in advanced menu of PRESTOMIG 210MP.
English
Advanced menu

The welding current

Switch on / switch off
the output voltage on
the output lead

HOT START

ARC FORCE
Advanced menu

The welding current

Switch on / switch off
the output voltage on
the output lead
Error's Message (only PRESTOMIG
210MP)
Contact with the Technical Service Center or Lincoln
Electric, when a machine's display of PRESTOMIG
210MP will show a message of the Figure 7 or similar.
9
001
Figure 7.
English