Tabla de contenido
SAFETY
• Carefully place the child in the stroller
seat and bring the safety harness
around the child's waist and over the
child's shoulders. Place the crotch strap
between the child's legs. Insert the male
end of each shoulder/waist belt into the
buckle on the crotch strap. Tighten the
harness so it is snug around the child's
waist and over the child's shoulders
(Fig. 8b).
TO RELEASE THE CHILD
9) • To release, push the button on center
clasp and the two harness buckles will
pop free (Fig. 9).
9
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Adjust for a snug fit
Fig. 8b
Center Clasp
Fig. 9
SIT N' STAND
®
WARNING:
The rear
platform and jump seat are
designed to accommodate
a child who is at least 2 1/2
years old, has good balance
and coordination, and is not
over 40 inches tall.
10) • Attach the Joy Ride Platform: Pull the
locks back on the platform and attach it
to the rear tube of the frame (Fig. 10a).
When the platform is not in use, remove
platform or rotate it upwards and secure it
to the basket with the snap.
NOTE: Make sure the platform locks onto
the frame before use.
• Jump Seat: Always use the 3-point
harness while in the seated position
facing the stroller handle. Put the seat
belt around the child's waist and buckle to
the crotch strap (Fig. 10b). Adjust the seat
belt to be snug around the child's waist.
• Standing: Your child can stand on
the riding platform facing forwards or
backwards.
NOTE: Use caution while standing on the
platform. Make sure your child is always
holding onto the frame while riding.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos Los Derechos Reservados.
SIT N' STAND
®
Fig. 10a
Fig. 10b
10
Tabla de contenido
