Led Indicators - PNI GreenHouse H01 Manual De Usuario

Connect the solar panel to the charge unit.
Insert the safety fuse in it's place.
If the sunlight is enough the charging indicator will light to show you the battery is charging.
If the battery voltage is over 14V the charge level indicator will flash to let you know the battery is full.
Note: if this is the first time you use the system or you didn't use it for a long time we recommend to charge the battery for at
least 10 hours before use.
Turn on the charge unit.
Connect the included LED lamps or other electronics you want to power.
Turn on the FM radio or MP3 player if you want to listen to music.
Turn off the charge unit if you don't need it anymore, to avoid discharging the battery.
When offering the panels and extension cords, we have taken a full consideration of the usage for customers, please do not
randomly lengthen or change them. If you do have a reason to adjust or change them, please make sure that the dimension
of the solar panel cable is no less than 0.5mmp, and the dimension of the cable for LED lamps cables no less than 0.3mmp.
What's more, all the lead wires have negative and positive polarity, please be sure to notice the distinction.

LED INDICATORS:

Indicator
Battery charging
status indicator
Load indicator
Battery charge
level indicator
State
On
Flashing
Off
On
Flashing
Off
100% On
Off
80% On
Off
60% On
Off
40% On
Off
20% On
Flashing
Off
3
Function
Battery is charging
The battery is full and the system can
be used for powering desired devices
The battery is low or the charging unit
is not connected to the solar panel
Consumers are in the system
The system is overloaded, remove
some of the consumers
There are no consumers
Battery voltage higher than 13V
Battery voltage lower than 12.6V
Battery voltage higher than 12.6V
Battery voltage lower than 12.4V
Battery voltage higher than 12.4V
Battery voltage lower than 12.0V
Battery voltage higher than 12.0V
Battery voltage lower than 11.5V
Battery voltage higher than11.5V
Battery voltage lower than 11V, the
system will enter in undervoltage
protection state
The charge unit is off or the battery
voltage lower than 10.5V
EN