Selecting The Anchors; Assembly; Safety Inspection - Nussbaum JUMBO LIFT 4000 NT Instrucciones De Servicio

8.6

Selecting the anchors

Anchor Without floor cover
type (screed/tiles)
Heavy duty anchor
Liebig/ BM 10-15/70/40
Strongtie
Fischer FH 15/50 B
Hilti HSL-3-G M10/40
Injection anchor
MKT VMZ-A 75 M12-
25/145
Hilti HIT-HY 200 with
HIT-Z M12
Fischer Highbond FHB II-A S
M12x75/25
i Similar value anchors and other known brands
of anchor manufacturers can be used when
considering the conditions.
8.7

Assembly

Follow the instructions enclosed in the anchor
i
packaging.
76
9
The safety inspection is required to guarantee oper-
With floor
ational safety of the lift. It is to be done.
covering
1. Before first commissioning after setting up the lift
(screed/tiles)
Use the "single safety inspection" form
2. After first commissioning, check regularly at least
once per year.
Use the "regular safety inspection" form
Anchor length
depends on the
3. After changes to the lift construction.
floor covering
Use the "extraordinary safety inspection" form
i
i
Anchor length
depends on the
floor covering
This inspection book contains forms with a printed
inspection plan for safety inspections. Please use
the appropriate form, record the condition of the
inspected lift and leave the completed form in this
inspection book.
011

Safety inspection

Single and regular safety inspections must be
done by a specialist. It is recommended to do
maintenance at the same time.
After a change in construction (for example
changing the load carrying capacity or chang-
ing the lifting height) and after significant mainte-
nance on load carrying parts (e.g. welding work),
inspection by a technical expert is required (ex-
traordinary safety inspection).
OPI_JUMBO LIFT 4000 NT_V3.0_DE-EN-FR-ES-IT