Information Concerning The Instrument; Power Supply - Beper 40.998 Manual De Instrucciones

Nail drill Use Instructions
Product description
- Manicure and pedicure device
- 6 high-quality attachments
- 6 Single-use attachments made
of sandpaper
- speed controller
- direction controller
- Adapter
2. Commencing operation

2.1 Information concerning the instrument

This manicure and pedicure device comes with high-quality attachments. The supplied 12
attachments are made with durable sapphire coating / polishing felt.
Together with the continuously adjustable speed regulation and right/left rotation, profes-
sional foot and nail care at the standard of a pedicurist is possible.

2.2 Power supply

To ensure adequate power at all times for good and powerful treatment of the feet and
nails, this instrument is provided with a permanently attached power unit.
After use, before cleaning and changing any accessory parts, the power unit should always
be disconnected.
Ensure that the sliding switch on the device is in the centre position (= off) before you
connect the device to a power supply.
3. Application
3.1 General
– This instrument is intended only for the treatment of hands (manicure) and feet (pedicu-
re). Make sure that the device is switched off beforehand.
– Select an attachment and push it onto the instrument spindle using a slight pressure. The
attachments can be heard to engage. To remove: pull the attachment and instrument apart
in the axial direction (straight).
12