Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The device is designed and built to ensu-
re the maximum safety in its immediate
vicinity (IP24) as well as to resist atmo-
spheric agents. The fans are protected
with unwanted intrusion of bodies throu-
gh the protection grilles. The accidental
opening of the electrical panel with the
Important safety infor-
mation
The machine must not exceed the pres-
sure and temperature limits indicted in
the table shown in the paragraph
"Operating limits" technical manual.
Correct functioning is not guaranteed
after a fire; before starting up the machi-
ne again, contact an authorised after
sales centre.
The machine is fitted with safety valves
that in the case of excessive pressure
can discharge hot gases into the atmo-
sphere.
Wind, earthquakes and other natural
phenomena of
exceptional intensity have not been
considered.
Danger:
Voltage
Danger:
Temperature
12
Improper uses
machine in operation is prevented by
the door lock sectioning device. Do not
rest tools or heavy objects on the side
heat exchanger coils so as not to ruin
the fins.
:
N.B.
If the unit is used in aggressive atmo-
sphere or with aggressive water consult
head office.
Following extraordinary maintenance
carried out on refrigeration circuits,
with the replacement of components,
carry out the following operations befo-
re starting up the machine again:
Pay the closest attention when resto-
ring the refrigerant load indicated on
the machine's rating plate (inside the
electrical panel).
Open all the taps on the refrigerating
circuit.
Correctly connect the power supply
Danger:
Cut off the power
Danger:
Moving
parts
Do not introduce objects or allow
them to fall through the grilles of
the fan motors.
Do not lean on the heat exchanger
coil: Cutting surfaces.
and the grounding.
Check the plumbing connections.
Check that the water pump works
properly.
Clean the water filters.
Check that the condenser coils are
not dirty or clogged.
Check the proper rotation of the fan
unit.
Danger!!!
Tabla de contenido
